How to Maintain a Padel Court: Complete Care Guide

A well-maintained padel court plays better, looks professional, and lasts longer. The good news: modern courts are built to be low-maintenance. Hllye courts use hot-dip galvanized steel with baked powder coating, CE-certified tempered glass, and professional turf — but a simple care routine will protect your investment and keep members happy. This guide covers the four key areas: turf, glass, steel, and lighting.

1. Turf Maintenance: The Surface Your Players Feel

The turf is the most visible and most used part of the court. Hllye courts use professional turf — fibrillated or monofilament options — with a silica sand infill. A simple routine keeps it in tournament condition:

• Brush regularly: daily or after heavy use, brush the turf to redistribute the sand and keep fibers upright. Use a dedicated padel/turf brush or a mechanical sweeper for multi-court clubs.
• Check sand levels: the silica sand infill migrates over time, especially in high-traffic areas. Top up sand as needed and re-brush for an even distribution.
• Remove debris: clear leaves, dust, and foreign objects before they get ground into the fibers.
• Address spills quickly: clean any liquids promptly to avoid staining; use only water and mild detergent approved for synthetic turf.

2. Glass Panel Care: Keep the View Clear

Padel courts feature large tempered glass panels (10mm or 12mm, CE-certified to EN 12150) that take impact from every rally. Keep them in top shape:

• Clean regularly: wash the glass with water and a soft sponge or squeegee. For stubborn marks, use a glass cleaner that won't leave residue.
• Inspect the neoprene pads: Hllye glass is mounted on 5mm anti-vibration neoprene pads to prevent breakages. Check these pads periodically and replace any that show wear.
• Check for chips or cracks: tempered glass is strong, but inspect panels after any unusual impact. Small edge chips can be monitored; significant damage should be assessed by a professional and the panel replaced.

3. Steel Structure: Corrosion Protection That Lasts

The steel frame is the backbone of the court. Hllye uses hot-dip galvanized steel with a high-temperature baked powder coating — a combination designed to resist rust even in coastal areas.

• Visual inspection: quarterly, walk the perimeter and inspect pillars, mesh, and joints for coating damage, rust spots, or loose bolts.
• Touch up coating: if the powder coating is scratched (e.g., from equipment impact), touch up with matching paint to protect the galvanized layer.
• Tighten fasteners: check anchor bolts and structural connections after extreme weather or heavy vibration.
• Keep the mesh clean: rinse the mesh panels periodically to remove dust and salt build-up in coastal climates.

All Hllye steel structures carry a 10-year warranty — if you spot anything unusual, contact our team and we'll help you assess it.

4. LED Lighting: Check and Replace as Needed

Hllye courts come with zero-glare LED floodlights (typically 4x 150W or 200W, delivering 300-400 lux). LED systems are low-maintenance but not zero-maintenance:

• Clean the fixtures: dust reduces light output. Wipe the lenses a few times a year.
• Check aiming and levels: ensure the lights still cover the court evenly; adjust the aim if anything has shifted.
• Replace as needed: LED units have a long service life, but when one fails, replace it promptly so the court stays evenly lit.
• Verify wiring: have an electrician inspect connections and weatherproofing periodically, especially after storms.

5. Seasonal & Annual Checklist

6. When to Call the Factory

Our support doesn't end at delivery. If you notice significant coating damage, glass that needs replacing, or unusual wear, contact the Hllye team — we'll help you source the right parts and guide your local technician. For reference, all steel structures are covered by a 10-year warranty, and our resources page has maintenance guidance and support options.

Want to keep your courts playing at their best from day one? Start with a properly installed court and a factory-direct partnership that includes ongoing engineering support.